
We Only Have One Home
the
grunts
OK, we'll agree that GRUNT is kind of a weird name...but we have our reasons.
All of our kits reference the military in some way, and it just so happens that the knuckle dragger that runs our little company is an old infantry soldier (affectionately called a Grunt). He knows all too well what it takes to carry twice the load over and through almost any terrain, in the toughest conditions, and still complete the mission. He wanted to design a trailer kit that could do the same....and that design is what came to be known around here as The Grunt. In Uncle Sam’s Army they’re 11Bravos/Charlies; in the Corps they’re 0311’s/0341's……and every one of them wears the GRUNT name with pride.
The GRUNT is an expedition style trailer kit that sits on a professionally welded, 2" x 3" 11g steel frame that has been sand blasted, epoxy primed, and coated with two coats of Raptor Liner bed liner material.
The 100% composite cargo box is constructed using marine grade plywood which is fully encased on all interior and exterior surfaces with no less than two coats of marine grade epoxy (NEVER polyester). All corners & seams are bonded using epoxy fillets throughout, with 45/45 - 17/08oz matte biaxial tape on interior joints/seams, and 45/45 6oz no matte biaxial tape on all exterior joints/seams. Finally, all exterior surfaces are sprayed with Raptor Liner in any color you choose.
The GRUNTs are as tough as their name implies, so tough that they come with a lifetime warranty against any kind of rot or structural failures due to faulty materials or workmanship.
BUILD YOUR OWN GRUNT
CAMPBOX Original is an off-road trailer that has a 3 mm reinforced chassis and an 18 mm plywood cell covered in Line-X (polyurea), choose the color you want, and integrates the comfort elements you require: system of water and expandable electric, among others.
Built for the most expert and also for the most novice, CAMPBOX reinvents the limits of the outdoor experience, giving you all the comforts of your home in a light and compact trailer .
Discover this revolutionary Expedition Trailer made in Chile.
THE E-1 PVT
$4,800
(Plus your suspension/tires/wheels)
.jpg)
TRAILER FRAME:
4' x 6' welded frame (2" x 3" 11g steel), epoxy primed and raptor lined black.
2" ball hitch with safety chains (Lock N Roll articulating hitch is available)
Custom made flat fenders (11g steel)
Two 1/2" D rings (rated at 12000lbs)
2" rear receiver hitch
LED tail lights/turn signals
Lighted license plate frame
Welded spring hangers for your 3500lb straight axle
CAB:
4'w x 6'l x 30"h
Two (2) front cargo doors (L & H) and one (1) rear swing out door (L & H), each with keyed compression locks and black stainless steel hinges.
The exterior is Raptor Lined in the color of your choice
The interior is left in the raw (sheathed in 2 coats of marine epoxy)
Square steel welded roof rack
THE E-2 PVT
$4,800
(Plus your suspension/tires/wheels)
.jpg)
TRAILER FRAME:
4' x 6' welded frame (2" x 3" 11g steel), epoxy primed and raptor lined black.
2" ball hitch with safety chains (Lock N Roll articulating hitch is available)
Custom made flat fenders (11g steel)
Two 1/2" D rings (rated at 12000lbs)
2" rear receiver hitch
LED tail lights/turn signals
Lighted license plate frame
Pre drilled holes for your TIMBREN axleless suspension
CAB:
4'w x 6'l x 30"h
Two (2) front cargo doors (L & H) and one (1) rear swing out door (L & H), each with keyed compression locks and black stainless steel hinges.
The exterior is Raptor Lined in the color of your choice
The interior is left in the raw (sheathed in 2 coats of marine epoxy)
Square steel welded roof rack
THE E-3 PFC
$4,800
(Plus your suspension/tires/wheels)
.jpg)
TRAILER FRAME:
4' x 8' welded frame (2" x 3" 11g steel), epoxy primed and raptor lined black.
Lock N Roll articulating hitch with safety chains
Custom made flat fenders (11g steel)
Two 1/2" D rings (rated at 12000lbs)
2" rear receiver hitch
LED tail lights/turn signals
Lighted license plate frame
Welded spring hangers for your 3500lb straight axle
Removable tongue
2'd x 4'w x 10"h welded front rack
CAB:
4'w x 6'l x 30"h
Two (2) front cargo doors (L & H) and one (1) rear swing out door (L & H), each with keyed compression locks and black stainless steel hinges.
The exterior is Raptor Lined in the color of your choice
The interior is left in the raw (sheathed in 2 coats of marine epoxy)
Square steel welded roof rack
THE E-4 SPC
$4,800
(Plus your suspension/tires/wheels)
.jpg)
TRAILER FRAME:
4' x 8' welded frame (2" x 3" 11g steel), epoxy primed and raptor lined black.
Lock N Roll articulating hitch with safety chains
Custom made flat fenders (11g steel)
Two 1/2" D rings (rated at 12000lbs)
2" rear receiver hitch
LED tail lights/turn signals
Lighted license plate frame
Removable tongue
Pre drilled holes for your TIMBREN axleless suspension
Three 5 gallon water cans mounted between cab & front box
Small nose box
CAB:
4'w x 6'l x 30"h
Two (2) front cargo doors (L & H) and one (1) rear swing out door (L & H), each with keyed compression locks and black stainless steel hinges.
The exterior is Raptor Lined in the color of your choice
Square steel welded roof rack
The interior is Raptor Lined white
Front mounted slide out for fridge or kitchen
THE E-5 SGT
$4,800
(Plus your suspension/tires/wheels)
.jpg)
TRAILER FRAME:
4' x 8' welded frame (2" x 3" 11g steel), epoxy primed and raptor lined black.
Lock N Roll articulating hitch with safety chains
Custom made flat fenders (11g steel)
Two 1/2" D rings (rated at 12000lbs)
2" rear receiver hitch
LED tail lights/turn signals
Lighted license plate frame
Removable Tongue
Pre drilled holes for your TIMBREN axleless suspension
Three 5 gallon water cans mounted between cab & front box
Small nose box
Rear mounted swing out tire carrier
CAB:
4'w x 6'l x 38"h
Two (2) front cargo doors (L & H) and one (1) rear swing out door (L & H), each with keyed compression locks and black stainless steel hinges.
The exterior is Raptor Lined in the color of your choice
The interior is Raptor Lined white
Front mounted slide out for fridge or kitchen
Custom roof rack
Two exterior side boxes (L&H)
THE E-7 SFC
$4,800
(Plus your suspension/tires/wheels)
.jpg)
THE E-8 1SGT
$4,800
(Plus your suspension/tires/wheels)
.jpg)
TRAILER FRAME:
4' x 8' welded frame (2" x 3" 11g steel), epoxy primed and raptor lined black.
Lock N Roll articulating hitch with safety chains
Custom made flat fenders (11g steel)
Two 1/2" D rings (rated at 12000lbs)
2" rear receiver hitch
LED tail lights/turn signals
Lighted license plate frame
Removable tongue
Pre drilled holes for your TIMBREN axleless suspension
Rear mounted swing out tire carrier
LED lights under the frame
2'd x 4'w x 10"h welded front rack
CAB:
4'w x 6'l x 38"h
Two (2) front cargo doors (L & H) and one (1) rear swing out door (L & H), each with keyed compression locks and black stainless steel hinges.
The exterior is Raptor Lined in the color of your choice
The interior is Raptor Lined white
Front mounted slide out for custom kitchen
Custom roof rack
Two exterior side boxes (L&H)
30 gallon interior water storage w/pump
Custom kitchen on slide out
Lights
Electrical
Links to pics of model
Pioneer rack
THE E-6 SSG
$4,800
(Plus your suspension/tires/wheels)
.jpg)
TRAILER FRAME:
4' x 8' welded frame (2" x 3" 11g steel), epoxy primed and raptor lined black.
Lock N Roll articulating hitch with safety chains
Custom made flat fenders (11g steel)
Two 1/2" D rings (rated at 12000lbs)
2" rear receiver hitch
LED tail lights/turn signals
Lighted license plate frame
Removable tongue
Pre drilled holes for your TIMBREN axleless suspension
Rear mounted swing out tire carrier
Large nose box
LED lights under the frame
CAB:
4'w x 6'l x 38"h
Two (2) front cargo doors (L & H) and one (1) rear swing out door (L & H), each with keyed compression locks and black stainless steel hinges.
The exterior is Raptor Lined in the color of your choice
The interior is Raptor Lined white
Front mounted slide out for custom kitchen
Custom roof rack
Two exterior side boxes (L&H)
30 gallon interior water storage w/pump
Custom kitchen on slide out
Lights
Electrical
Pioneer rack
THE E-9 CSM
$4,800
(Plus your suspension/tires/wheels)
.jpg)
TRAILER FRAME:
4' x 8' welded frame (2" x 3" 11g steel), epoxy primed and raptor lined black.
Lock N Roll articulating hitch
Pre drilled holes for your TIMBREN axleless suspension
Custom made flat fenders (11g steel)
Two 1/2" D rings (rated at 12000lbs)
2" rear receiver hitch
LED tail lights/turn signals
Lighted license plate frame
Rear mounted swing out tire carrier
Large nose box
2" x 2" framed exoskeleton with multiple roof racks (8" between each)
CAB:
4'w x 6'l x 38"h
Two (2) front cargo doors (L & H) and one (1) rear swing out door (L & H), each with keyed compression locks and black stainless steel hinges.
Exterior side boxes (L&H)
Front mounted slide out for fridge or kitchen
Custom kitchen????
The exterior is Raptor Lined in the color of your choice
The interior is left in the raw (sheathed in 2 coats of marine epoxy)
Square steel welded roof rack